Vessel And Barge Use Docking And Lifting Ship Launching Airbag
1. Material: Natural Rubber and Nylon Cord
2. Fittings: Inflation Valve, Pressure Gauge, Pulling Ring
3. Layers Range: 3-12 Layers
4. Size Range: Dia 0.6-2.8m, Len 5.0-25m
5. Service Life: 6-10Years
6. Certs: CCS, BV, ISO, RS, ABS, Etc
Structure of The Florescence ship launching airbags
Please the picture 1 of Florescence inflatable rubber airbag
structure . It is composed by airbag body and terminal iron part.
The airbag body is composed by natural rubber and strength fiber
material through vulcanization processing; The terminal iron part
is made of cast iron, it is combined closely with the bag body; One
end is for pulling when move the airbag, and the other end is for
charging and discharging the air. All the fittings in picture 2 and
3 will be supplied with airbags for free.
Materials
An airbag is to be constructed of an outer rubber layer, one or
more synthetic-tyre-cord layers, and an inner rubber layer. The
arrangement of synthetic-tyre-cord reinforcement layers is shown in
the picture below, all materials shall be vulcanized firmly.Prior to the airbag production, the outer and inner rubber layers
shall be tested to meet criteria in the following table in
accordance with the test methods given in the international
standard list in the table. While only one satisfactory sample per
batch is required for test numbers 1 through 3, all others must be
tested for test numbers 4 through 9 annually. If the first sample
fails, two additional sample should be tested. If the additional
samples pass the test requirements, the materials will be deemed to
have passed the test. Otherwise, the materials will be deemed to
have failed the test and another batch of materials shall be
selected.
Size Range:(airbag size depend on ship size) |
Diameter(D) : | From 0.6m to 2.8m |
Effective Length(EL) : | From 5.0m to 25.0m |
Total Length(TL) : | From 7.0m to 28.0m |
Standard Number of Layers: | Usually 4-10 layers |
Overview
Florescence ship rubber airbag comply with ISO 14409. ship airbag
can be used to launch and upgrade a ship up to 100,000DWT.
Comparing to the traditional slipway launching method, the ship
launching airbags are much environmental, because ship airbag can
launch a ship at any seaside, so there's no need to worry about the
construction of launching facilities; besides, the marine
airbag need little maintenance and can be used repeatedly.
Features
●Different airbag size stock available, quick delivery
●Provide repair kit and on site instruction
●Long time service life can be reused many times
●Wear resistance and anti aging
●Good raw material and cord fabric
●Do no harm to the environment. Time & money saving
●Need no more than air compressors, winches and ropes
●Marine airbags are much cheaper and portable than other methods
Application
1.For ship upgrading, conversion or new/repair launching (Ship
launching airbags)
2.Marine airbag for salvaging sunken ship or heavy immersed steel
structure
3.For hoisting and transporting heavy goods up to 10,000 tonnes
structure on land
4.For floating use purpose as improve the draft.
5.Pneumatic rubber core for architecture engineering Container for
storing and transporting gas and corrosive chemical liquid and pure
water for voyage
6.Rubber bag for ship ballast
7.Rubber airbags used for culvert making
Our Culture
Company Mission:To promote the customers'sustainable growth to assist customers to
become bigger and stronger,strive for contry's prosperity.
Vision:To become a leader in worldwide trading industry.
Values:Customer-orientd,mutual benefits,honesty,responsibility.
ABOUT US
Qingdao Florescence Marine Supply Co., LTD.
Factory established in 1992, Qingdao Florescence Marine Supply Co.,
Ltd (Subsidiary of Qingdao Florescence Co., Ltd) specializes in
manufacturing pneumatic rubber fenders, foam fenders, various ship
dock rubber fenders, and ship launching & salvage rubber airbags.
FLORESCENCE products are designed, manufactured, and tested by per
ISO 9001:2015 requirements. And every unit is robustly built to the
stringent requirements of ship surveyors such as CCS, BV, RS, ABS,
LR, etc.
We are the supplier of many navy, such as Bangladesh Navy, France
Navy, Greece Navy, Thailand Navy, Italy Navy, Philippines Navy,
etc.
FLORESCENCE considers our clients as a part of the team, treating
them as partners. We are always together with them on each step of
the way, from finding the solutions of fender using and ship
launching to the manufacturing and installation operations on site.
Our rich experience has earned us a reputation as a dependable
partner in many ports and shipyards around the world
